Northlight Systems DMX512 to Relay circuit board, includes relays and address switch.

Northlight's Relay board will receive DMX512 digital protocol and standard 0-10 VDC analog to control mechanical relays.
No complicated setup, basically the board is plug and play. Easy to use screw terminals.

New - 1 and 4 relay , 20 Amps per relay 220 VAC.
1 or 4 or 8 SPDT relays with normally open and normally closed contacts available at screw terminals.
Relays are 10 Amp relays at 110 VAC.
Relays included on board.
The DMX Relay board is capable of receiving DMX512, addresses all 512 channels.
Low power DMX receiver chip, only 1/8 unit load on the DMX line.
ESD protected receiver chip with "fail Safe" features.
Jumper selectable on board terminator.
Jumper selectable DMX hold, retains last valid data if DMX is disconnected.
All connections to board via screw terminals, no soldering or special connectors required.
Address switch option described below.

DIN mounts available for all relay boards, see Accessories page.

Address switch option
There are 3 options shown below.
Select a switch type when ordering.

Mini DIP Switch

The Mini DIP switch is mounted on the circuit board.
Use this when infrequent address changes are needed.

board mounted switch

Mini DIP Switch with LED

The Mini DIP switch is mounted on the enclosure panel.
Includes LED and ribbon cable connecting lead.

panel mounted switch

Pushbutton Switch with LED

The Address is entered direct starting with 1.
Includes separate LED and ribbon cable connecting lead for the switch.
Includes aluminium mounting plate.
Easy address setting, direct reading.

Push button, direct reading.

OLED Address Switch with LED

Use up and down buttons to set the Start Address.
Includes separate LED and ribbon cable connecting lead for the switch.
Includes aluminium mounting plate.
Easy address setting, direct reading.

OLED address switch, direct reading.

If you don't have a PayPal account, or don't want one, no problem.
Send an email to info@NorthlightDMX.com with your order and we will send a PayPal invoice.
A PayPal invoice is an email from PayPal with a link back to PayPal to enter your credit card info.
Click in the "Contact" button for warranty info.

If you need a power supply or plastic enclosure, click on the Accessories button.

If PayPal over charges for shipping we will refund the over payment.
We only charge for actual cost of shipping.

Need to drive solid state relays? Check out the PWMGP08 board on the PWM page.

Basic 1 - 10Amp relay

Small size, 2.00" X 2.25".
Outputs one 10 AMP relay with normally open and normally closed terminals.
Jumper selectable as DMX "sense" relay. When good DMX in, relay is closed, no DMX and the relay is open.
Jumper selectable DMX level for relay close, 10% or 75%.
Jumper selectable on board terminator.
Low power DMX receiver chip, only 1/8 unit load on the DMX line.
ESD protected receiver chip with "fail Safe" features.
Uses a single DMX channel, Start address up to 512.
Quality relay included on PCB.

Download the Quick start guide for the RLYA01 relay board in PDF format.

To purchase: Enter quantity - Click on "add to cart"

$44.00 - Mini DIP switch - RLYA01M

$54.00 - Mini DIP sw., panel mount with LED - RLYA01MP .

$72.00 - Push button switch with LED - RLYA01P.

NEW Basic 1 - 20 Amp relay

Heavy 2 Ounce copper traces.
30 Amp rated relay, 220 VAC.
5.08mm screw terminals accept 12 Awg wire.
Small size, 2.00" X 2.25".
One relay with normally open terminals.
Jumper selectable as DMX "sense" relay. When good DMX in, relay is closed, no DMX and the relay is open.
Jumper selectable DMX level for relay close, 10% or 75%.
Jumper selectable on board terminator.
Low power DMX receiver chip, only 1/8 unit load on the DMX line.
ESD protected receiver chip with "fail Safe" features.
Uses a single DMX channel, Start address up to 512.
Quality relay included on PCB.
Does not supply AC power to relay contacts, screw terminals are relay contacts only.

Download the Quick start guide for the RLYD01 relay board in PDF format.

To purchase: Enter quantity - Click on "add to cart"

$49.00 - Mini DIP switch - RLYD01M

Input Qty -

Shipping cost will be in shopping cart.
$8.00 USA
$35.00 CANADA
$49.50 Worldwide

$59.00 - Mini DIP sw., panel mount with LED - RLYD01P .

Input Qty -

Shipping cost will be in shopping cart.
$8.00 USA
$35.00 CANADA
$49.50 Worldwide

$75.00 - OLED Address switch with LED - RLYD01O.

Input Qty -

Shipping cost will be in shopping cart.
$8.00 USA
$35.00 CANADA
$49.50 Worldwide

One relay + 0-10 VDC output.

Small size, 2.25" X 2.50".
Outputs one 10 AMP relay and one 0-10 VDC control voltage.
Perfect to dim LED fixtures and Flourescent lamp ballasts that accept 0-10 VDC control voltage.
Uses a single DMX channel or 2 consecutive channels, determined by jumper setting.
Accept switch or 0-10 VDC analog input.
Low power DMX receiver chip, only 1/8 unit load on the DMX line.
ESD protected receiver chip with "fail Safe" features.
Jumper selectable on board terminator.
Quality OMRON relay.
Does not supply AC power to relay contacts, screw terminals are relay contacts only.

Download the manual for the RLY01 relay board in PDF format.

To purchase: Enter quantity - Click on "add to cart" -

$54.00 - Mini DIP switch - RLY01M

Input Qty -

Shipping cost will be in shopping cart.
$8.00 USA
$35.00 CANADA
$49.50 Worldwide

$64.00 - Mini DIP sw., panel mount with LED - RLY01MP .

Input Qty -

Shipping cost will be in shopping cart.
$8.00 USA
$35.00 CANADA
$49.50 Worldwide

$81.00 - Push button switch with LED - RLY01P.

- Out of stock -
Input Qty -

Shipping cost will be in shopping cart.
$8.00 USA
$35.00 CANADA
$49.50 Worldwide

NEW - 20 Amp 4 Channel relay board.

Heavy 2 Ounce copper traces.
30 Amp rated relay, 220 VAC.
5.08mm screw terminals accept 12 Awg wire.
Accept 0-10 VDC for manual control without DMX.
Uses a block of 4 channels, starting at the selected address.
4 - 30 Amp, 220 VAC relays included on board.
All screw terminals, no user supplied connectors required.
Low power DMX receiver chip, only 1/8 unit load on the DMX line.
ESD protected receiver chip with "fail Safe" features.
Jumper selectable on board terminator.
Does not supply AC power to relay contacts, screw terminals are relay contacts only.
Download the manual for the 4 channel relay board in PDF format.

To purchase: Enter quantity - Click on "add to cart".

$70.00 - Mini DIP switch - RLYD04M
Sorry - Out of stock.
Input Qty -

Shipping cost will be in shopping cart.
$8.00 USA
$35.00 CANADA
$49.50 Worldwide

$80.00 - Mini DIP sw., panel mount with LED - RLYD04P.
Sorry - Out of stock.
Input Qty -

Shipping cost will be in shopping cart.
$8.00 USA
$35.00 CANADA
$49.50 Worldwide

$95.00 - OLED address switch with LED - RLYD04O.
Sorry - Out of stock.
Input Qty -

Shipping cost will be in shopping cart.
$8.00 USA
$35.00 CANADA
$49.50 Worldwide

4 Channel relay board.

Size 3.00"W X 3.25"L.
Uses a block of 4 channels, starting at the selected address.
4 - 10 Amp, 110 VAC relays on board.
All screw terminals, no user supplied connectors required.
Heavy copper traces.
Low power DMX receiver chip, only 1/8 unit load on the DMX line.
ESD protected receiver chip with "fail Safe" features.
Jumper selectable on board terminator.
Does not supply AC power to relay contacts, screw terminals are relay contacts only.
Download the manual for the 4 channel relay board in PDF format.

To purchase: Enter quantity - Click on "add to cart".

$64.00 - Mini DIP switch - RLY04M

Input Qty -

Shipping cost will be in shopping cart.
$8.00 USA
$35.00 CANADA
$49.50 Worldwide

$74.00 - Mini DIP sw., panel mount with LED - RLY04MP.

Input Qty -

Shipping cost will be in shopping cart.
$8.00 USA
$35.00 CANADA
$49.50 Worldwide

$90.00 - Push button switch with LED - RLY04P.

- out of stock -
Input Qty -

Shipping cost will be in shopping cart.
$8.00 USA
$35.00 CANADA
$49.50 Worldwide

8 Channel relay board.

Only 4.25" X 3.00".
Uses a block of 8 channels, starting at the selected address.
8 - 10 Amp, 110 VAC relays on board.
All screw terminals, no user supplied connectors required.
Heavy copper traces.
Low power DMX receiver chip, only 1/8 unit load on the DMX line.
ESD protected receiver chip with "fail Safe" features.
Jumper selectable on board terminator.
Does not supply AC power to relay contacts, screw terminals are relay contacts only.
Download the manual for the 8 channel relay board in PDF format.

To purchase: Enter quantity - Click on "add to cart".

$90.00 - Mini DIP switch - RLY08M

Input Qty -

Shipping cost will be in shopping cart.
$8.00 USA
$35.00 CANADA
$49.50 Worldwide

$99.00 - Mini DIP sw., panel mount with LED - RLY08MP .

Input Qty -

Shipping cost will be in shopping cart.
$8.00 USA
$35.00 CANADA
$49.50 Worldwide

$120.00 - Push button switch with LED - RLY08P .

- out of stock -
Input Qty -

Shipping cost will be in shopping cart.
$8.00 USA
$35.00 CANADA
$49.50 Worldwide

2 Neutrik XLR.s on aluminum panel
DMX in and thru - both XLR's are connected, male and female
1.50" X 2.75".
Includes quality Neutrik 5 pin XLR connectors.
durable powder coat finish.
screw terminals on PCB backplane
machined aluminum panel
comes complete, just like in the picture.

Download the quick start guide in PDF format.

To purchase: Enter quantity - Click on "add to cart" -

$30.00 - XLR2 - dual XLR panel

Input Qty -

Shipping cost will be in shopping cart.
$7.00 USA
$35.00 CANADA
$49.50 Worldwide

Shipping
Northlight offers Priority Mail and Express mail services.
Priority mail in the USA is usually 2nd day.
Priority mail to Canada take usually 3-5 days to Canadian customs. After that it is up to Canadian customs to process the package.
Express worldwide in the USA is next day(overnight).
Priority mail outside the USA is usually 5-7 days to the destination country. Then it goes to that countries customs and then their postal service.

We combine shipping. Click on your shipping choice only once per order.
If you overpay for shipping we will refund the difference from actual cost.

Other payment options include Company check, Electronic funds transfer, Western Union. Email for more information.

Send To info@NorthlightDMX.com.